DocumentCode :
767484
Title :
Low-voltage tunable TE/TM converter on ion-sliced lithium niobate thin film
Author :
Izuhara, T. ; Roth, R. ; Osgood, R.M., Jr. ; Bakhru, S. ; Bakhru, H.
Author_Institution :
Microelectron. Sci. Labs., Columbia Univ., New York, NY, USA
Volume :
39
Issue :
15
fYear :
2003
fDate :
7/24/2003 12:00:00 AM
Firstpage :
1118
Lastpage :
1119
Abstract :
Lift-off of a prefabricated thin-film lithium niobate device using ion slicing has been demonstrated. The device is a low-voltage electro-optically tunable TE/TM mode converter, which is fabricated on a sliced 10 μm-thick film. A new electrode configuration allows this thin-film device low-voltage tuning of the mode conversion wavelength at 0.26 nm/V. The high tuning per volt is attributed to an improved overlap integral in the thin-film form of the device.
Keywords :
convertors; electro-optical devices; integrated optics; ion implantation; lithium compounds; optical fabrication; optical tuning; thin film devices; 10 micron; LV tunable TE/TM converter; LiNbO3; crystal ion slicing technique; electrode configuration; electrooptically tunable mode converter; ion-sliced LiNbO3 thin film; low-voltage TE/TM converter; low-voltage tuning; mode conversion wavelength tuning; prefabricated thin-film device lift-off;
fLanguage :
English
Journal_Title :
Electronics Letters
Publisher :
iet
ISSN :
0013-5194
Type :
jour
DOI :
10.1049/el:20030741
Filename :
1222680
Link To Document :
بازگشت