R&D for a minigap undulator at LURE

Author

Marcouillé, O. ; Boyer, J.-C. ; Corlier, M. ; Denise, S. ; Duval, J.-P. ; Herbeaux, C. ; Labrude, E. ; Lefèbvre, D. ; Marlats, J.-L. ; Rommeluère, P. ; Vandenberghe, M. ; Vétèran, J.

Volume

12

Issue

1

fYear

2002

fDate

3/1/2002 12:00:00 AM

Firstpage

691

Lastpage

694

Abstract

An in-vacuum minipole (short period) Insertion Device has been developed at LURE (Laboratoire pour l´Utilization du Rayonnement Electromagnetique) in the frame of R&D. A particular attention has been especially taken in the design and the mechanics in order to ease the cancellation of magnetic errors which affect the performances of the ID. The magnetic field (0.68 T) is produced by two arrays of permanent magnets installed on a fixed gap frame. Each magnet can be vertically moved in order to correct multipolar errors and phase errors. In addition, end correctors have been especially designed to increase the efficiency of the multipolar correction. In this paper, the authors present the design of the undulator, the mechanical choices as well as the calculations and the vacuum tests.

Keywords

permanent magnets; research initiatives; superconducting magnets; wigglers; 0.68 T; France; R&D; design; in-vacuum minipole insertion device; magnetic errors cancellation; magnetic field; mechanics; minigap undulator; multipolar correction; permanent magnets; vacuum tests; Error correction; Magnetic fields; Magnetic separation; Magnetization; Permanent magnets; Research and development; Steel; Structural beams; Superconducting magnets; Undulators;

fLanguage

English

Journal_Title

Applied Superconductivity, IEEE Transactions on

Publisher

ieee

ISSN

1051-8223

Type

jour

DOI

10.1109/TASC.2002.1018495

Filename

1018495