Residual Stress Analysis in Nonoriented Electrical Steel Sheets by Barkhausen Noise Measurements

Author

Vourna, Polyxeni ; Ktena, Aphrodite ; Hristoforou, Evangelos

Author_Institution

Lab. of Phys. Metall., NTUA, Zografos, Greece

Volume

50

Issue

4

fYear

2014

fDate

Apr-14

Firstpage

1

Lastpage

4

Abstract

The nondestructive magnetic Barkhausen noise (MBN) technique has been used to study the effect of residual stress in nonoriented electrical steels. The MBN response is presented and evaluated with respect to thermomechanical treatments. The ensuing microstructure was studied using scanning electron microscopy, transmission electron microscopy, and hardness measurements. The stress-dependent MBN measurements exhibit good correlation with XRD stress measurements made by the d - sin² ψ method, using Cr-Ka radiation, and (211) reflections. It has been found that there is a good correlation between MBN response and variations in microstructure, which affects mechanical properties.

Keywords

Barkhausen effect; X-ray diffraction; hardness; internal stresses; ion beam effects; magnetic noise; scanning electron microscopy; steel; thermomechanical treatment; transmission electron microscopy; XRD stress measurements; hardness; mechanical properties; microstructure; nondestructive magnetic Barkhausen noise method; nonoriented electrical steel sheets; radiation; residual stress analysis; scanning electron microscopy; thermomechanical treatments; transmission electron microscopy; Annealing; Microstructure; Residual stresses; Silicon; Steel; Stress measurement; Annealing; X-ray diffraction; magnetic Barkhausen noise; residual stress determination;

fLanguage

English

Journal_Title

Magnetics, IEEE Transactions on

Publisher

ieee

ISSN

0018-9464

Type

jour

DOI

10.1109/TMAG.2013.2285728

Filename

6798041