Multiwire -Pinches at 1-MA Current on the COBRA Pulsed-Power Generator

The rebuilt COBRA pulsed-power generator, which has a variable current-pulse waveform and amplitude (95-150-ns rise time and ~1-MA peak current), has extended the range of the current-pulse parameters that can be used to study the X-pinches. X-pinches with 4-12 wires of several different wire materials (from Al to W) with diameters from 25 to 75 mum have been studied. The influence of the rate of the rise of current and the X-pinch wire mass on the X-pinch plasma formation and pinch implosion dynamics has been studied using a set of diagnostics with spatial and/or temporal resolution. Multiwire X-pinches were placed in the diode center, and/or two four-wire X-pinches were placed in one of the four parallel return-current circuits of the diode. The experiments showed that the most important factor determining the first X-ray burst timing is the linear mass density of the X-pinch wires, and an optimal value for obtaining a single high-energy X-ray burst was found. Radiographic images of the different test objects, wires in wire-array Z-pinches, and the X-pinches, themselves, were obtained using a micrometer-scale spatial resolution