Title :
High-Q factor three-dimensional inductors
Author :
Piernas, Belinda ; Nishikawa, Kenjiro ; Kamogawa, Kenji ; Nakagawa, Tadao ; Araki, Katsuhiko
Author_Institution :
Fujitsu Compound Semicond. Inc., San Jose, CA, USA
fDate :
8/1/2002 12:00:00 AM
Abstract :
In this paper, the great flexibility of three-dimensional (3-D) monolithic-microwave integrated-circuit technology is used to improve the performance of on-chip inductors. A novel topology for high-Q factor spiral inductor that can be implemented in a single or multilevel configuration is proposed. Several inductors were fabricated on either silicon substrate (ρ = 30 Ω · cm) or semi-insulating gallium-arsenide substrate demonstrating, more particularly, for GaAs technology, the interest of the multilevel configuration. A 1.38-nH double-level 3-D inductor formed on an Si substrate exhibits a very high peak Q factor of 52.8 at 13.6 GHz and a self-resonant frequency as high as 24.7 GHz. Our 4.9-nH double-level GaAs 3-D inductor achieves a peak Q factor of 35.9 at 4.7 GHz and a self-resonant frequency of 8 GHz. For each technology, the performance limits of the proposed inductors in terms of quality factor are discussed. Guidelines for the optimum design of 3-D inductors are provided for Si and GaAs technologies.
Keywords :
MMIC; Q-factor; gallium arsenide; inductors; silicon; 13.6 GHz; 24.7 GHz; 30 ohmcm; 4.7 GHz; 8 GHz; GaAs; GaAs substrate; Si; Si substrate; double-level 3-D inductor; high-Q factor spiral inductor topology; high-Q factor three-dimensional inductors; multilevel configuration; optimum design; peak Q factor; performance limits; quality factor; self-resonant frequency; three-dimensional MMIC technology; Conductors; Frequency; Gallium arsenide; Inductors; Integrated circuit technology; MMICs; Q factor; Signal processing; Silicon; Transceivers;
Journal_Title :
Microwave Theory and Techniques, IEEE Transactions on
DOI :
10.1109/TMTT.2002.801342