DocumentCode :
809649
Title :
Three-phase motor in railway traction
Author :
Duffy, M.C.
Author_Institution :
Sch. of Eng. & Adv. Technol., Sunderland Univ., UK
Volume :
139
Issue :
6
fYear :
1992
fDate :
11/1/1992 12:00:00 AM
Firstpage :
329
Lastpage :
337
Abstract :
The first use of the three-phase traction motor was on systems which supplied three-phase power direct to the locomotive, with two contact wires above each track. This system was later replaced either by single-phase AC systems using AC commutator motors, or by high voltage DC railways. In the United States, Alexanderson introduced the split-phase technique, using a locomotive mounted single-phase motor coupled to a three-phase generator. The methods used before 1960 for supplying three-phase traction motors needed complex fixed works, or else they required locomotive mounted equipment which was heavy and large. Between 1962 and 1965, Brush pioneered current-inverter three-phase traction using a diesel-electric locomotive as a test bed. A Co-Co diesel-electric locomotive successfully introduced three-phase traction motor technology into modern practice in 1971. The DB Class 120 electric locomotive established current-inverter technology, and the asynchronous motor, in modern traction between 1980 and 1982. By the mid-1980s there were accepted as standard practice.
Keywords :
AC motors; diesel-electric locomotives; electric locomotives; history; invertors; railways; traction; AC commutator motors; Brush; Co-Co diesel-electric locomotive; DB Class 120 electric locomotive; asynchronous motor; current-inverter; railway traction; three-phase traction motor;
fLanguage :
English
Journal_Title :
Science, Measurement and Technology, IEE Proceedings A
Publisher :
iet
ISSN :
0960-7641
Type :
jour
Filename :
173356
Link To Document :
بازگشت