Low-loss and thermally stable TE-mode selective polymer waveguide using photosensitive fluorinated polyimide

A low-loss, thermally stable TE-mode selective optical waveguide was fabricated using a photosensitive fluorinated polyimide. The polymer undergoes photocrosslinking under UV exposure, thus changing its refractive index. The photocrosslinking-induced refractive index change was utilized to form channel waveguides. The propagation losses of the photosensitive fluorinated polyimide waveguides were less than 0.3 and 0.5 dB/cm for TE polarization at wavelengths of 1.3 and 1.55 μm, respectively. The measured polarization extinction ratio was higher than 29 and 28 dB at wavelengths of 1.3 and 1.55 μm, respectively. The refractive index of fluorinated polyimide film remains almost constant after being stored at 150/spl deg/C for 600 min.