Status of the VICKSI Heavy Ion Accelerator

Author

Busse, W. ; Efken, B. ; Hilscher, D. ; Homeyer, H. ; Lettau, H. ; Lindenberger, K.H. ; Mahnke, H.-E. ; Maier, K.H. ; Ziegler, K. ; Anderberg, B. ; Hansen, P. ; Holm, S. ; Lindback, S. ; Malm, B. ; Harms-Ringdahl, L. ; Rohlin, J. ; Susini, A.

Author_Institution

Hahn-Meitner-Institut fÃ¿r Kernforschung Berlin, Germany

Volume

22

Issue

3

fYear

1975

fDate

6/1/1975 12:00:00 AM

Firstpage

1643

Lastpage

1646

Abstract

The heavy ion accelerator combination VICKSI being built at the Hahn-Meitner-Institute in Berlin consists of a 6-MV Van de Graaff accelerator as injector into a 4 sector cyclotron with a mass energy product of 100. The primary design aim of this accelerator combination is 200 MeV for Carbon to Argon ions. The Van de Graaff including ion source and high voltage terminal is undergoing major reconstruction. The beam matching and transport system between the two accelerators comprising a stripper and two bunchers has been designed. The components for this system have been or will be ordered until March 1975. The cyclotron is being built by Scanditronix/Sweden. The four sector magnets will be assembled at Scanditronix for final shimming and field mapping. The RF-system is under test with low power. The new building for the cyclotron is completed except for interior work. The anticipated date for first beam injection into the cyclotron is November 1976.

Keywords

Argon; Assembly; Buildings; Cyclotrons; Ion accelerators; Ion sources; Magnets; Particle beams; Testing; Voltage;

fLanguage

English

Journal_Title

Nuclear Science, IEEE Transactions on

Publisher

ieee

ISSN

0018-9499

Type

jour

DOI

10.1109/TNS.1975.4327955

Filename

4327955