Observer using low-frequency injection for sensorless induction motor Control-parameter sensitivity analysis

The zero-frequency vector control of an induction motor without a speed sensor has proven to be a very difficult task. Uncertainty and variation in the electrical parameters of the motor deteriorate the performance of fundamental-wave flux observers as the frequency approaches zero, and observers based on high-frequency signal injection rely on motor-specific phenomena. A new method has recently been proposed, where a low-frequency current signal is injected in the estimated rotor flux direction. If there is an error in the orientation, the signal gives rise to a torque oscillation and affects the back electromotive force (EMF) through the mechanical system. The phenomenon makes it possible to reach sensorless zero-frequency operation. This paper shows that the method is insensitive to the variation of the motor parameters. Experiments confirm the result.