A Scheme for the Power Control in a DFIG Connected to a DC Bus via a Diode Rectifier

This paper deals with a new conversion topology for doubly-fed induction generators (DFIGs) suitable for wind energy conversion systems integrated in microgrids. It consists of a DFIG which is fed by a pulse width modulation converter on the rotor and with the stator connected to a dc grid through a diode rectifier. In this configuration, the stator diode rectifier and the rotor-side inverter share the same dc bus, so that the conventional grid-side inverter is avoided. Since only a diode rectifier designed for the full power and a reduced power inverter are required, this layout allows a cheap and effective integration of the DFIG with other generating and storage systems connected to the same dc bus. A simple control technique suitable to regulate the power delivered to the dc grid is proposed. The scheme is based on the regulation of the amplitude of a suited fraction of the rotor flux linkage: the optimal value of this fraction is theoretically deduced in order to minimize the DFIG derating due to the current harmonics. The effectiveness of the proposed control is proven by simulations and experimental tests.