DocumentCode :
839274
Title :
A Superconducting High-Luminosity Insertion in the Intersecting Storage Rings (ISR)
Author :
Billan, J. ; Henrichsen, K.N. ; Laeger, H. ; Lebrun, Ph. ; Perin, R. ; Pichler, S. ; Pugin, P. ; Resegotti, L. ; Rohmig, P. ; Tortschanoff, T. ; Verdier, A. ; Walckiers, L. ; Wolf, R.
Author_Institution :
ISR Division, CERN CH-1211 Geneva-23
Volume :
26
Issue :
3
fYear :
1979
fDate :
6/1/1979 12:00:00 AM
Firstpage :
3179
Lastpage :
3181
Abstract :
A focusing insertion will be constructed at an intersection of the ISR, to achieve a reduction of the effective beam height by about a factor 6 in the interaction diamond and a corresponding increase of the luminosity. It will contain eight superconducting quadrupole magnets, capable of producing gradients of 43 Tm-1 in a warm bore of 173 mm diameter: four of them have a magnetic length of 1.15 m and four of 0.65 m. The magnets are also equipped with sextupole windings, to match the gradients to particle momenta over the beam width, and with dodecapole correction windings. After construction and successful operation of a prototype magnet in the laboratory, competitive tenders were obtained from industry on the basis of technical specifications and manufacturing drawings. The magnets proper and the cryostats are being manufactured under two separate contracts. The insertion will be installed within 1980 at intersection I8, for use in physics experiments with a large magnetic spectrometer.
Keywords :
Boring; Construction industry; Laboratories; Magnetic separation; Manufacturing; Particle beams; Prototypes; Storage rings; Structural beams; Superconducting magnets;
fLanguage :
English
Journal_Title :
Nuclear Science, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9499
Type :
jour
DOI :
10.1109/TNS.1979.4329976
Filename :
4329976
Link To Document :
بازگشت