Title :
Design and performance issues of RF coils utilized in ultra high field MRI: experimental and numerical evaluations
Author :
Ibrahim, Tamer S. ; Kangarlu, Alayar ; Chakeress, Donald W.
Author_Institution :
Sch. of Electr. Eng., Oklahoma Univ., Norman, OK, USA
fDate :
7/1/2005 12:00:00 AM
Abstract :
In this paper, two TEM resonators were evaluated experimentally and numerically at 8 tesla (T) (340 MHz for 1H imaging). The coils were constructed to be 21.2-cm long (standard) and 11-cm long (a proposed less claustrophobic design). The experimental evaluation was done on a single cadaver using an ultra high field, 8 T, whole-body magnet. The numerical modeling was performed using an in-house finite difference time domain package that treats the coil and the load (anatomically detailed human head model) as a single system. The coils were tested with quadrature excitation at different coil alignment positions with respect to human head. For head imaging at 8 T, the overall numerical and experimental results demonstrated that when compared to the longer coil, the shorter coil provides superior signal-to-noise ratio, coil sensitivity, and excite field in the biological regions that lie within both of the coils´ structures. A study of the RF (excite/receive fields) homogeneity showed variations in the performance of both coils that are mostly dependant on the region of interest and the position of coil with respect to the head. As such, depending on the application, the shorter coil could be effectively utilized.
Keywords :
biomedical MRI; finite difference time-domain analysis; physiological models; resonators; 11 cm; 21.2 cm; 340 MHz; 8 T; TEM resonators; cadaver; head imaging; in-house finite difference time domain package; radio frequency coil design; ultra high field MRI; Cadaver; Coils; Finite difference methods; Humans; Magnetic domains; Magnetic heads; Magnetic resonance imaging; Numerical models; Packaging; Radio frequency; TEM resonator; numerical simulation; radiofrequency coil design; ultra high field; Brain; Cadaver; Computer Simulation; Computer-Aided Design; Equipment Design; Equipment Failure Analysis; Feasibility Studies; Humans; Image Enhancement; Magnetic Resonance Imaging; Models, Biological; Reproducibility of Results; Sensitivity and Specificity; Transducers;
Journal_Title :
Biomedical Engineering, IEEE Transactions on
DOI :
10.1109/TBME.2005.847564