Feedback linearizing control of switched reluctance motors

Motivated by technological advances in power electronics and signal processing, and by the interest in using direct drives for robot manipulators, we investigate the control problem of high-performance drives for switched reluctance motors (SRM´s). SRM´s are quite simple, low cost, and reliable motors as compared to the widely used dc motors. However, the SRM presents a coupled nonlinear multivariable control structure which calls for complex nonlinear control design in order to achieve high dynamic performances. We first develop a detailed nonlinear model which matches experimental data and establish an electronic commutation strategy. Then, on the basis of recent nonlinear control techniques, we design a state feedback control algorithm which compensates for all the nonlinearities and decouples the effect of stator phase currents in the torque production. The position dependent logic of the electronic commutator assigns control authority to one phase, which controls the motion, while the remaining phase currents are forced to decay to zero. Simulations for a direct drive, single link manipulator with the SRM are reported, which show the control performance of the algorithm we propose in nominal conditions and test its robustness versus the most critical parameter uncertainties of payload mass and stator resistance.