Abstract :
The action of the audion as a detector and simple amplifier is explained, with the method of verification of the theory by means of oscillograms. To reinforce the oscillations in the grid circuit two methods are employed: first, to couple the grid circuit to the wing circuit and arrange the latter to permit audio frequency currents to pass freely in it; and second, to use a large inductance in the wing circuit, thereby tuning it to the incoming frequency (in conjunction with the capacity between the filament and wing in the audion itself). Both methods may be used together. Various methods of coupling grid and wing circuits are shown. Methods of combined audio and radio-frequency amplification are described. The audion, being a generator of alternating current of any desired frequency, can be used as a beat receiver. A steady audion generator of regular groups of radio frequency oscillations is illustrated. Various methods of audio frequency tuning permitting high selectivity are possible. By the use of two audions in cascade, amplifications as high as 1000 are attainable. The cascade systems can be arranged so as to operate both audions either synchronously or nonsynchronously. As an alternative to beat reception of sustained wave signals, an arrangement is explained wherein the amplifying ratio of a repeating audion is varied periodically at an audio frequency. Coupled to this system is a simple audion detector. Musical signals of any desired pitch are thus obtained. It is found that static of large amplitude nearly always decreases the wing current, while signal (with beat reception) alternately increases and decreases it. A system of circuits is described whereby this fact is taken advantage of in balancing out static while retaining an additive response to signals, thus effecting an elimination of static to a considerable extent. Finally, instances of long distance stations received and interference overcome in practice are given.
