An SIS mixer using two junctions connected in parallel

We have fabricated a superconductor-insulator-superconductor (SIS) mixer using a couple of junctions connected in parallel through a stripline inductor. The junctions have significantly larger area, i.e. larger capacitance, and smaller normal resistance than conventional ones. In order to obtain a good impedance matching between the source and the junctions, an impedance transformer made of a superconducting stripline was integrated with the junctions. The capacitance of the junctions was tuned out by the inductor to obtain a broadband operation without mechanical tuning elements. It was shown that the double sideband noise temperature of the receiver employing this type of mixer device was less than 40 K over the bandwidth of 90-115 GHz. The lowest receiver noise temperature of /spl sim/20 K, which is only 4 times as large as the quantum limited photon noise of hv/k/sub B/, was obtained around 105 GHz.<>