Current Harmonic Compensation by a Single-Phase Shunt Active Power Filter Controlled by Adaptive Neural Filtering

This paper presents a single-phase shunt active power filter (APF) for current harmonic compensation based on neural filtering. The shunt active filter, realized by a current-controlled inverter, has been used to compensate a nonlinear current load by receiving its reference from a neural adaptive notch filter. This is a recursive notch filter for the fundamental grid frequency (50 Hz) and is based on the use of a linear adaptive neuron (ADALINE). The filter´s parameters are made adaptive with respect to the grid frequency fluctuations. A phase-locked loop system is used to extract the fundamental component from the coupling point voltage and to estimate the actual grid frequency. The current control of the inverter has been performed by a multiresonant controller. The estimated grid frequency is fed to the neural adaptive filter and to the multiresonant controller. In this way, the inverter creates a current equal in amplitude and opposite in sign to the load harmonic current, thus producing an almost sinusoidal grid current. An automatic tuning of the multiresonant controller is implemented, which recognizes the largest three harmonics of the load current to be compensated by the APF. The stability analysis of the proposed control system is shown. The methodology has been applied in numerical simulations and experimentally to a properly devised test setup, also in comparison with the classic sinusoidal current control based on the P-Q theory.