DocumentCode :
880254
Title :
A Microwave Power Limiter (Correspondence)
Author :
Rodriguez, Manuel J. ; Weissman, D.
Volume :
10
Issue :
3
fYear :
1962
fDate :
5/1/1962 12:00:00 AM
Firstpage :
219
Lastpage :
220
Abstract :
Through the use of the familiar hybrid directional coupler and two PIN junction diodes as load impedances, the power delivered to the port not directly coupled to the input may be limited to any desired level, without rigid tolerances on the diode impedances. Starting with the scattering matrix of the hybrid and specifying arbitrary load reflection coefficients, the general properties of the device will be derived, and then its power-limiting capabilities will be examined in conjunction with the properties of the PIN diode.
Keywords :
Charge carrier processes; Charge carriers; Conductivity; Diodes; Directional couplers; Equations; Impedance; Reflection; Scattering; Voltage;
fLanguage :
English
Journal_Title :
Microwave Theory and Techniques, IRE Transactions on
Publisher :
ieee
ISSN :
0097-2002
Type :
jour
DOI :
10.1109/TMTT.1962.1125495
Filename :
1125495
Link To Document :
بازگشت