DocumentCode
895053
Title
A monolithic high-speed sample-and-hold amplifier for digital audio
Author
Van de Plassche, R.J. ; Schouwenaars, Hans J.
Volume
18
Issue
6
fYear
1983
Firstpage
716
Lastpage
722
Abstract
A monolithic high-speed sample-and-hold amplifier is described which has an acquisition time of 1.5 /spl mu/s to 0.001% for a 10-V step and an aperture uncertainty of less than 0.5 ns. Distortion is 0.001% over the audio band, while in an A/D and D/A converter loop a signal-to-noise ratio better than 90 dB is measured. Chip size is 1.5/spl times/2.5 mm/SUP 2/.
Keywords
Analogue-digital conversion; Audio-frequency amplifiers; Bipolar integrated circuits; Compensation; Linear integrated circuits; Operational amplifiers; Sample and hold circuits; analogue-digital conversion; audio-frequency amplifiers; bipolar integrated circuits; compensation; linear integrated circuits; operational amplifiers; sample and hold circuits; Apertures; Broadband amplifiers; Capacitors; Feedback circuits; Frequency response; Operational amplifiers; Performance gain; Resistors; Switches; Voltage;
fLanguage
English
Journal_Title
Solid-State Circuits, IEEE Journal of
Publisher
ieee
ISSN
0018-9200
Type
jour
DOI
10.1109/JSSC.1983.1052022
Filename
1052022
Link To Document