Title :
High-power continuous-wave operation of quantum-cascade lasers up to 60/spl deg/C
Author :
Yu, J.S. ; Evans, A. ; David, J. ; Doris, L. ; Slivken, S. ; Razeghi, M.
Author_Institution :
Electr. & Comput. Eng. Dept., Northwestern Univ., Evanston, IL, USA
fDate :
3/1/2004 12:00:00 AM
Abstract :
High-temperature high-power continuous-wave (CW) operation of high-reflectivity-coated 12-μm-wide quantum-cascade lasers emitting at /spl lambda/ = 6 μm with a thick electroplated Au top contact layer is reported for different cavity lengths. For a 3-mm-long laser, the CW optical output powers of 381 mW at 293 K and 22 mW at maximum operating temperature of 333 K (60/spl deg/C) are achieved with threshold current densities of 1.93 and 3.09 kA/cm2, respectively. At 298 K, the same cavity gives a maximum wall plug efficiency of 3.17% at 1.07 A. An even higher CW optical output power of 424 mW at 293 K is obtained for a 4-mm-long laser and the device also operates up to 332 K with an output power of 14 mW. Thermal resistance is also analyzed at threshold as a function of cavity length.
Keywords :
current density; high-temperature effects; laser cavity resonators; quantum cascade lasers; thermal resistance; 1.07 A; 12 mum; 14 mW; 22 mW; 293 K; 298 K; 3 mm; 3.17 percent; 332 K; 333 K; 381 mW; 4 mm; 424 mW; 6 mum; 60 degC; cavity lengths; electroplated Au top contact layer; high-power continuous-wave operation; high-reflectivity-coated quantum-cascade lasers; high-temperature continuous-wave operation; maximum wall plug efficiency; quantum wells; quantum-cascade lasers; thermal resistance; threshold current densities; Face detection; Gold; Power generation; Power lasers; Power measurement; Pulse measurements; Quantum cascade lasers; Quantum well lasers; Stimulated emission; Temperature;
Journal_Title :
Photonics Technology Letters, IEEE
DOI :
10.1109/LPT.2004.823686