An impedance-matching technique for increasing the bandwidth of microstrip antennas

The nature of the inherent narrow bandwidth of conventional microstrip patch antennas is considered. It is observed that, except for single-feed circularly polarized elements, their bandwidth is limited only by the resonant behavior of the input impedance and not by radiation pattern or gain variations, which usually are negligible over a moderate 10 to 20% bandwidth. Therefore, broadband impedance matching is proposed as a natural to increase the bandwidth. The maximum obtainable bandwidth is calculated using Fano´s broadband matching theory. It is found that by using an optimally designed impedance-matching network, the bandwidth can be increased by a factor of at least 3.9, the exact value depending on the degree of matching required. A transmission-line prototype for a proper matching network is developed. The translation of this prototype network into a practical structure (e.g. a microstrip or stripline circuit) is considered. Practical design examples and experimental results which clearly show the validity of the technique are given