DocumentCode
943456
Title
Construction of a large superconducting spectrometer dipole magnet with negative curvature
Author
Zeller, A.F. ; Bricker, S. ; DeKamp, J.C. ; Laumer, H. ; Nolen, J.A. ; Swanson, R.T. ; Zhang, B.
Author_Institution
Nat. Superconducting Cyclotron Lab., Michigan State Univ., East Lansing, MI, USA
Volume
3
Issue
1
fYear
1993
fDate
3/1/1993 12:00:00 AM
Firstpage
114
Lastpage
117
Abstract
The construction of a large superconducting dipole magnet with a negative curvature side is described. The cryostable coils consist of 350 turns each and operate at 500 A. Support links which support the coil and minimize bobbin deflections have been built and tested. A mapping system which follows the beam trajector is being built. The coil winding, the support links, the assembly, and the field mapper are discussed.<>
Keywords
beam handling equipment; cyclotrons; particle spectrometers; proton accelerators; superconducting magnets; 500 A; beam trajector; coil winding; construction; cryostable coils; large superconducting spectrometer dipole magnet; mapping system; negative curvature; superconducting cyclotron; support links; Clamps; Costs; Cyclotrons; Packaging; Spectroscopy; Structural beams; Superconducting coils; Superconducting magnets; Wire;
fLanguage
English
Journal_Title
Applied Superconductivity, IEEE Transactions on
Publisher
ieee
ISSN
1051-8223
Type
jour
DOI
10.1109/77.233683
Filename
233683
Link To Document