The cable-in-conduit Nb/sub 3/Sn conductor for the EURATOM-ENEA 12 T wind-and-react magnet

Author

Bruzzese, R. ; Ceresara, S. ; Chiarelli, S. ; della Corte, A. ; Gislon, P. ; Pietrobon, T. ; Rossi, S. ; Spadoni, M.

Author_Institution

Assoc. EURATOM-ENEA, CRE, Frascati, Italy

Volume

3

Issue

1

fYear

1993

fDate

3/1/1993 12:00:00 AM

Firstpage

515

Lastpage

517

Abstract

A 12-T wind-and-react magnet using a 6-kA Nb/sub 3/Sn cable is being contributed by ENEA within the framework of R&D in the European Fusion Program. The authors present results on the strand, jacket, and manufacturing of the cable-in-conduit (CIC) conductor. Data on critical current, AC losses, and RRR on the Nb/sub 3/Sn strand are reported, as well as the mechanical properties at 300 K and 77 K of the modified 316LN jacket before and after heat treatment. The approach used at Europa Metalli-LMI for cabling, compaction, and insertion of the superconducting cable into the circular tube and the method used to reach the final square cross section with the desired void fraction are illustrated and discussed.<>

Keywords

critical currents; eddy current losses; fusion reactor theory and design; heat treatment; niobium alloys; superconducting cables; superconducting magnets; tin alloys; voids (solid); 12 T; 300 K; 316LN jacket; 6 kA; 77 K; AC losses; CIC conductor; EURATOM-ENEA; European Fusion Program; NET-ITER superconducting magnets; Nb/sub 3/Sn strand; RRR; cable-in-conduit conductor; circular tube; critical current; heat treatment; manufacturing; mechanical properties; superconducting cable insertion; void fraction; wind-and-react magnet; Cable shielding; Conductors; Critical current; Heat treatment; Manufacturing; Mechanical factors; Niobium; Superconducting cables; Superconducting magnets; Tin;

fLanguage

English

Journal_Title

Applied Superconductivity, IEEE Transactions on

Publisher

ieee

ISSN

1051-8223

Type

jour

DOI

10.1109/77.233756

Filename

233756