Conceptual design of a 70 mm aperture quadrupole for LHC insertions

Due to their detrimental effect on the Large Hadron Collider (LHC) dynamic aperture, the random multipole errors of the LHC insertion quadrupoles need to be lower by a factor of five than the corresponding errors in the lattice. For achieving this level of random errors, the authors propose to increase the aperture of the insertion quadrupoles. A novel approach for achieving a quadrupole strength of 250 T/m in an aperture of 70 mm, based on a graded multilayer coil wound from NbTi conductor cooled at 1.8 K, has been investigated. The design concept of the coil, which incorporates a shell-like structure composed of a high current density block imbedded in a low density shell, is developed. The coil design, parameters of the superconducting cable, and the yoke and collar design are described, both for a two-in-one and a single quadrupole geometries.<>