Title :
PMOS-Only Sleep Switch Dual-Threshold Voltage Domino Logic in Sub-65-nm CMOS Technologies
Author :
Liu, Zhiyu ; Kursun, Volkan
Author_Institution :
Univ. of Wisconsin-Madison, Madison
Abstract :
A circuit technique is proposed in this paper for simultaneously reducing the subthreshold and gate oxide leakage power consumption in domino logic circuits. Only p-channel sleep transistors and a dual-threshold voltage CMOS technology are utilized to place an idle domino logic circuit into a low leakage state. Sleep transistors are added to the dynamic nodes in order to reduce the subthreshold leakage current by strongly turning off all of the high-threshold voltage transistors. Similarly, the sleep switches added to the output nodes suppress the voltages across the gate insulating layers of the transistors in the fan-out gates, thereby minimizing the gate tunneling current. The proposed circuit technique lowers the total leakage power by up to 77% and 97% as compared to the standard dual-threshold voltage domino logic circuits at the high and low die temperatures, respectively. Similarly, a 22% to 44% reduction in the total leakage power is observed as compared to a previously published sleep switch scheme in a 45-nm CMOS technology. The energy overhead of the circuit technique is low, justifying the activation of the proposed sleep scheme by providing a net savings in total energy consumption during short idle periods.
Keywords :
CMOS integrated circuits; integrated logic circuits; leakage currents; tunnelling; CMOS technology; PMOS only sleep switch; domino logic circuits; dual threshold voltage; energy overhead; gate oxide leakage power consumption; gate tunneling current; high-threshold voltage transistors; p-channel sleep transistors; subthreshold leakage current; Dynamic CMOS; electron tunneling; gate oxide tunneling; hole leakage; low-leakage sleep mode; multithreshold voltage; subthreshold leakage current;
Journal_Title :
Very Large Scale Integration (VLSI) Systems, IEEE Transactions on
DOI :
10.1109/TVLSI.2007.903947