A long InGaAsP/InP waveguide section with small dimensions

Author

Verboom, P. ; Oei, Y.S. ; Pennings, E. ; Smit, M. ; van Uffelen, J. ; van Brug, H. ; Moerman, I. ; Coudenijs, G. ; Demeester, P.

Author_Institution

Delft Univ. of Technol., Netherlands

Volume

4

Issue

10

fYear

1992

Firstpage

1112

Lastpage

1114

Abstract

A spirally folded InGaAsP/InP ridge-type waveguide with 12.4 mm length, corresponding to 4-cm free-space length, on a device area of 1 mm*1 mm, was realized. Insertion loss was measured to be 4 dB for TE-polarization and 4.5 dB for TM-polarization, most of which is caused by normal propagation loss (2 dB/cm for straight waveguides). Excess bending loss is estimated to be 1.5 dB for TE and 2 dB for TM-polarization.<>

Keywords

III-V semiconductors; gallium arsenide; gallium compounds; indium compounds; integrated optics; optical losses; optical waveguides; 1.5 dB; 12.4 mm; 2 dB; 4 cm; 4 dB; 4.5 dB; InGaAsP-InP; TE-polarization; TM-polarization; device area; excess bending loss; free-space length; insertion loss; normal propagation loss; ridge-type waveguide; semiconductors; spirally folded; straight waveguides; Electromagnetic waveguides; Fiber lasers; Indium phosphide; Laser noise; Noise level; Optical fibers; Optical waveguides; Optimized production technology; Solitons; Ultrafast optics;

fLanguage

English

Journal_Title

Photonics Technology Letters, IEEE

Publisher

ieee

ISSN

1041-1135

Type

jour

DOI

10.1109/68.163749

Filename

163749