DocumentCode
955729
Title
9.3-10.4-GHz-band cross-coupled complementary oscillator with low phase-noise performance
Author
Jia, Lin ; Ma, Jian-Guo ; Yeo, Kiat Seng ; Do, Manh Anh
Author_Institution
Centre for Integrated Circuits & Syst., Nanyang Technol. Univ., Singapore
Volume
52
Issue
4
fYear
2004
fDate
4/1/2004 12:00:00 AM
Firstpage
1273
Lastpage
1278
Abstract
A fully integrated 10-GHz-band voltage-controlled oscillator (VCO) has been designed and fabricated using commercial 0.18-μm CMOS technology. The complementary cross-coupled differential topology is adopted in the design. The measured phase-noise is around -89 dBc/Hz at the offset frequency of 100 kHz from the center frequency of 9.83 GHz, the output frequency tuning range of the fabricated VCO is 1.1 GHz ranging from 9.3 to 10.4 GHz, and the power consumption of the core VCO circuit is 5.8 mW. The design is the first one that adopts the complementary cross-coupled circuit structure for 10-GHz-band oscillators, and whose performances of the VCO are the best ones for 10-GHz-band oscillators, compared with the 10-GHz-band CMOS oscillators reported earlier.
Keywords
CMOS integrated circuits; MMIC oscillators; phase noise; power consumption; voltage-controlled oscillators; 0.18 micron; 1.1 GHz; 100 kHz; 5.8 mW; 9.3 to 10.4 GHz; CMOS technology; cross-coupled circuit structure; cross-coupled complementary oscillator; phase noise; power consumption; voltage-controlled oscillator; CMOS technology; Circuit optimization; Energy consumption; Integrated circuit technology; Phase noise; Radio frequency; Radiofrequency integrated circuits; Tuning; Voltage; Voltage-controlled oscillators;
fLanguage
English
Journal_Title
Microwave Theory and Techniques, IEEE Transactions on
Publisher
ieee
ISSN
0018-9480
Type
jour
DOI
10.1109/TMTT.2004.825621
Filename
1284798
Link To Document