• DocumentCode
    962187
  • Title

    AGS superconducting bending magnets

  • Author

    Robins, K.E. ; Sampson, W.B. ; McInturff, A.D. ; Dahl, P.F. ; Abbatiello, F. ; Gus, J.A. ; Bamberger, J. ; Brown, D. ; Damm, R. ; Kassner, D. ; Lasky, C. ; Schlafke, A.

  • Author_Institution
    IEEE TMAG
  • Volume
    13
  • Issue
    1
  • fYear
    1977
  • fDate
    1/1/1977 12:00:00 AM
  • Firstpage
    71
  • Lastpage
    73
  • Abstract
    Four large aperture superconducting bending magnets are being built for use in the experimental beams at the AGS. Each of these magnets is 2.5 m long and has a room temperature aperture of 20 cm. The magnets are similar in design to the dipoles being developed for ISABELLE and employ a low temperature iron core. Results are presented on the "training" behavior of the magnets and a comparison will be made with the smaller aperture versions of this design. The magnet field measurements include end fields and leakage fields as well as the harmonic components of the straight section of the magnet.
  • Keywords
    Accelerator magnets, superconducting; Alternating-gradient synchrotrons; Apertures; Boring; Conductors; Copper; Current density; Iron; Magnetic field measurement; Superconducting magnets; Temperature; Testing;
  • fLanguage
    English
  • Journal_Title
    Magnetics, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0018-9464
  • Type

    jour

  • DOI
    10.1109/TMAG.1977.1059435
  • Filename
    1059435
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=962187