Novel Patch-Via-Spiral Resonators for the Development of Miniaturized Bandpass Filters With Transmission Zeros

A novel patch-via-spiral resonator based on the dual-metal-plane configuration is proposed and examined. With the microstrip patch on the top plane serving as a capacitor and linking to the quasi-lumped spiral inductor on the bottom plane through a connecting via, the proposed dual-plane resonator structure located on the opposite sides of the single substrate may form a miniaturized one in the printed-circuit board fabrication. By suitably combining the proposed patch-via-spiral resonators, useful coupled-resonator pairs may be constructed to simultaneously provide electric and magnetic couplings. Based on these coupled-resonator pairs, a second-order bandpass filter with multiple transmission zeros is realized without requiring either the cross-coupled path or the source-load coupling. For design purpose, the equivalent-circuit model is also derived and verified. In this study, a fourth-order patch-via-spiral bandpass filter with both good passband selectivity and miniaturized size of only 22.14 mm times5.08 mm (i.e., 0.188lambda_g0times0.043lambda_g0) is implemented, where lambda_g0 denotes the guided wavelength of the 50-Omega microstrip line at center frequency