Reference model selection and adaptive control for induction motor drives

Author

Lin, F.-J. ; Liaw, C.M.

Author_Institution

Dept. of Electr. Eng., Nat. Tsing Hua Univ., Hsinchu, Taiwan

Volume

38

Issue

10

fYear

1993

fDate

10/1/1993 12:00:00 AM

Firstpage

1594

Lastpage

1600

Abstract

An adaptive model-following speed controller for induction motor drives is proposed and implemented. This adaptive controller is easy to implement since, for the controlled plant, only the output signal is fed back. In order to choose a reference model with the desired drive dynamic behavior, a two-degree-of-freedom (2-DOF) controller is designed, using a systematic procedure based on the prescribed drive specifications. The reference model of the adaptive system is chosen as the transfer function of the controlled drive system by the 2-DOF controller in the nominal case. An adaptation signal is augmented to let the prescribed specifications be maintained under a wide range of operating conditions

Keywords

control system synthesis; electric drives; induction motors; machine control; model reference adaptive control systems; transfer functions; velocity control; adaptation signal; adaptive model-following speed controller; dynamic behavior; induction motor drives; transfer function; two-degree-of-freedom; Adaptive control; Automatic control; Control system synthesis; Induction motor drives; Induction motors; Motor drives; Output feedback; Programmable control; Torque control; Transfer functions;

fLanguage

English

Journal_Title

Automatic Control, IEEE Transactions on

Publisher

ieee

ISSN

0018-9286

Type

jour

DOI

10.1109/9.241584

Filename

241584