A novel split-waveguide mount design for millimeter- and submillimeter-wave frequency multipliers and harmonic mixers

Author

Räisänen, Antti V. ; Choudhury, Debabani ; Dengler, Robert J. ; Oswald, John E. ; Siegel, Peter H.

Author_Institution

Jet Propulsion Lab., California Inst. of Technol., Pasadena, CA, USA

Volume

3

Issue

10

fYear

1993

Firstpage

369

Lastpage

371

Abstract

A split-waveguide mount for millimeter- and submillimeter-wave frequency multipliers and harmonic mixers is presented. It consists of only two pieces, block halves, which are mirror images of each other. The mount provides parallel and series impedance tuning with two sliding backshorts at both the input and output frequencies while utilizing E-plane arms to provide an in-line waveguide input and output. Its fabrication is much easier than that of a traditional multifrequency waveguide mount. Waveguide losses are minimized by a very compact design with very short input and output waveguides. This mount is especially well suited for planar diodes used with microstrip or suspended stripline RF filters.<>

Keywords

frequency multipliers; mixers (circuits); submillimetre wave devices; tuning; waveguide components; E-plane arms; RF filters; compact design; frequency multipliers; harmonic mixers; in-line waveguide input; inline waveguide output; microstrip; parallel impedance tuning; planar diodes; series impedance tuning; sliding backshorts; split-waveguide mount design; submillimeter-wave; suspended stripline; Arm; Diodes; Frequency; Impedance; Microstrip filters; Mirrors; Optical device fabrication; Power harmonic filters; Stripline; Tuning;

fLanguage

English

Journal_Title

Microwave and Guided Wave Letters, IEEE

Publisher

ieee

ISSN

1051-8207

Type

jour

DOI

10.1109/75.242264

Filename

242264