• DocumentCode
    967385
  • Title

    Soft Li-Ti-Zn ferrites with resistivity > 108Ω.cm

  • Author

    Simonet, William ; Hermosin, Antonio

  • Author_Institution
    IEEE TMAG
  • Volume
    14
  • Issue
    5
  • fYear
    1978
  • fDate
    9/1/1978 12:00:00 AM
  • Firstpage
    903
  • Lastpage
    905
  • Abstract
    Lithium-Titanium-Zinc spinel ferrites are shown to be candidates to replace Mn-Zn or Mn-Mg-Zn ferrites in industrial applications such as television deflection yokes where moderate initial permeability (500 to 1000) but high resistivity (>108Ωcm) are needed. The best compromises are found in the composition range given by 0.45 \\leq z \\leq 0.60 and 0 \\leq t \\leq 0.15 in the following formula : Li0.5(1+t-z)ZnzMnmFe2.5(1-0.2z-0.6t-0.4m-ε)TitO4where the Iron deficiency ε and the Manganese amount m are chosen in order to avoid any Fe2+formation. Bismuth addition in the range 10-3- 10-2Bi/mole reduces sintering temperature under 1000°C and strongly enhances the final electrical resistivity.
  • Keywords
    Ferrites; Bismuth; Conductivity; Electric resistance; Ferrites; Iron; Manganese; Permeability; TV; Temperature distribution; Zinc;
  • fLanguage
    English
  • Journal_Title
    Magnetics, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0018-9464
  • Type

    jour

  • DOI
    10.1109/TMAG.1978.1059933
  • Filename
    1059933
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=967385