DocumentCode
971942
Title
Design Study of 13–16 T 
Accelerator Dipole Based on Shell-Type Coils
Author
Andreev, N. ; Kashikhin, V.S. ; Kashikhin, V.V. ; Zlobin, A.V.
Author_Institution
Fermi Nat. Accel. Lab.
Volume
16
Issue
2
fYear
2006
fDate
6/1/2006 12:00:00 AM
Firstpage
350
Lastpage
353
Abstract
This paper presents results of design studies of high-field dipole magnets based on Nb3Sn shell-type coils performed to explore the possibilities and limitations of Nb3Sn accelerator magnets. To achieve the maximum bore field of 13-16 T, 3- and 4-layer coils were used. The coil design concepts, conductor parameters, results of magnetic and mechanical analysis are presented and discussed. Different conductor grading techniques are described and compared. An innovative design of a 3-layer coil without interlayer splices is described
Keywords
accelerator magnets; critical current density (superconductivity); niobium alloys; storage rings; superconducting coils; superconducting magnets; superconducting materials; synchrotrons; tin alloys; 13 to 16 T; 3-layer coil innovative design; LHC; Nb3Sn; Nb3Sn accelerator magnets; Nb3Sn shell-type coils; coil design; conductor grading techniques; conductor parameters; critical current density; high-field dipole magnets design; magnetic analysis; maximum bore field; mechanical analysis; superconducting accelerator magnets; Accelerator magnets; Boring; Cables; Conductors; Magnetic analysis; Magnetic fields; Magnetic separation; Superconducting coils; Superconducting magnets; Tin; Magnetic analysis; magnetic fields; superconducting accelerator magnets;
fLanguage
English
Journal_Title
Applied Superconductivity, IEEE Transactions on
Publisher
ieee
ISSN
1051-8223
Type
jour
DOI
10.1109/TASC.2006.871313
Filename
1642860
Link To Document