A current-type PWM rectifier with active damping function

A new control method for current-type pulse-width modulation (PWM) rectifiers which can provide active damping function is presented. This damping function is effective only on the harmonic components of AC input current selectively. Thus steady-state waveform distortion and transient oscillation of the input current are reduced by the active damping effects. The active damping function can be realized by feedback control of an LC filter connected to the AC side of the rectifier, and it does not require any additional components in the main circuits, permitting a simple circuit configuration. The control system of the proposed PWM rectifier is analyzed by using a simple block diagram developed in the present paper. From the analytical results, the influence of the circuit parameters and control delay on the active damping effects and the stability of the operation are clarified to establish the design method. To confirm the effectiveness of the active damping function, some results of basic experiments are included. As an example of application of the active damping function, the proposed rectifier is applied to reduce the harmonic currents generated by conventional rectifiers operating in parallel with the proposed rectifier. Some experimental results in this application are also included