DocumentCode
973619
Title
Mechanical End Turn Analysis for a 33 T Resistive Magnet at the Nijmegen HFML
Author
Wiegers, S.A.J. ; Rook, J. ; Perenboom, J.A.A.J. ; Maan, J.C.
Author_Institution
High Field Magnet Lab., Nijmegen Univ.
Volume
16
Issue
2
fYear
2006
fDate
6/1/2006 12:00:00 AM
Firstpage
949
Lastpage
952
Abstract
We present an improved mechanical end turn design for the 33 T resistive magnets, which have been installed in 2003 at the Nijmegen HFML. The improvement was necessary because of a failing clamping construction of the innermost two coils, which are electrically as well as mechanically in parallel. We show that by taking proper care it is possible to reliably clamp parallel coils with only one set of tierods, leaving as much space as possible for the conductor material of the innermost coil
Keywords
coils; conductors (electric); design engineering; electromagnets; magnetic fields; superconducting magnets; 33 T; Nijmegen HFML; clamping construction; coil; conductor material; magnetic field; mechanical end turn design analysis; resistive magnet; tierod; Clamps; Conducting materials; Helium; Laboratories; Magnetic analysis; Magnetic fields; Magnetic materials; Materials reliability; Superconducting coils; Temperature; High magnetic fields; resistive magnet;
fLanguage
English
Journal_Title
Applied Superconductivity, IEEE Transactions on
Publisher
ieee
ISSN
1051-8223
Type
jour
DOI
10.1109/TASC.2006.870789
Filename
1643003
Link To Document