DocumentCode :
975821
Title :
Ribbon-form silicon-iron alloy containing around 6% silicon
Author :
Tsuya, N. ; Arai, K.I. ; Ohmori, K. ; Shimanaka, H. ; Kan, T. ; Ohmori, Kenji ; Shimanaka, H. ; Kan, Tianze
Author_Institution :
Tohoku University, Sendai
Volume :
16
Issue :
5
fYear :
1980
fDate :
9/1/1980 12:00:00 AM
Firstpage :
728
Lastpage :
733
Abstract :
By a roller quenching method, XSi-(100-X)Fe ribbons ( 
) in the crystalline state were prepared. The size of them was 20 to 150μm in thickness, 2 to 25 mm in width and 5 to 10 m in length, and after annealing all of them were mechanically very soft so as to be bent 180°. In the grain structure of the as-prepared ribbons the columnar grains about 10μm in diameter were observed to grow from the surface to the middle part of the ribbon thickness. The texture of them have
) in the crystalline state were prepared. The size of them was 20 to 150μm in thickness, 2 to 25 mm in width and 5 to 10 m in length, and after annealing all of them were mechanically very soft so as to be bent 180°. In the grain structure of the as-prepared ribbons the columnar grains about 10μm in diameter were observed to grow from the surface to the middle part of the ribbon thickness. The texture of them haveKeywords :
Annealing; Coercive force; Electric resistance; Iron; Magnetic anisotropy; Magnetic materials; Magnetostriction; Perpendicular magnetic anisotropy; Silicon alloys; Temperature;
fLanguage :
English
Journal_Title :
Magnetics, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9464
Type :
jour
DOI :
10.1109/TMAG.1980.1060692
Filename :
1060692
Link To Document :
