DocumentCode :
979199
Title :
Design, fabrication and testing of superconducting solenoid systems for high energy beam applications
Author :
Hwang, K.F. ; Camille, R.J., Jr.
Author_Institution :
Magnetic Corporation of America, Massachusetts
Volume :
17
Issue :
1
fYear :
1981
fDate :
1/1/1981 12:00:00 AM
Firstpage :
182
Lastpage :
185
Abstract :
Two superconducting solenoid systems have been designed, built and tested by Magnetic Corporation of America (MCA) for Los Alamos Scientific Laboratory (LASL). One solenoid system which is being used at the Meson Physics Division has a central field of 3.5 T, coil length of 91.4 cm and a horizontal room temperature warm bore of 10 cm. Another system being used at the Applied Photo Chemistry Division has a central field of 3 T, coil length 91.4 and a room temperature warm bore of 14.6 cm. The stored energy of each coil is in excess of 100 kJ. Each system provides a unique extra heavy-duty low heat loss magnet support system. The design criteria, fabrication experience and test results of the coil and cryostats are presented.
Keywords :
Gas lasers; Superconducting magnets; Ultraviolet lasers; Boring; Fabrication; Laboratories; Mesons; Physics; Solenoids; Superconducting coils; Superconducting magnets; System testing; Temperature;
fLanguage :
English
Journal_Title :
Magnetics, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9464
Type :
jour
DOI :
10.1109/TMAG.1981.1061021
Filename :
1061021
Link To Document :
بازگشت