DocumentCode
995905
Title
A magnetocaloric pump for microfluidic applications
Author
Love, Lonnie J. ; Jansen, John F. ; Mcknight, Timothy E. ; Roh, Yul ; Phelps, Tommy J.
Author_Institution
Robotics & Energetic Syst. Group, Oak Ridge Nat. Lab., TN, USA
Volume
3
Issue
2
fYear
2004
fDate
6/1/2004 12:00:00 AM
Firstpage
101
Lastpage
110
Abstract
A magnetocaloric pump provides a simple means of pumping fluid using only external thermal and magnetic fields. The principle, which can be traced back to the early work of Rosensweig, is straightforward. Magnetic materials tend to lose their magnetization as the temperature approaches the material\´s Curie point. Exposing a column of magnetic fluid to a uniform magnetic field coincident with a temperature gradient produces a pressure gradient in the magnetic fluid. As the fluid heats up, it loses its attraction to the magnetic field and is displaced by cooler fluid. The impact of such a phenomenon is obvious: fluid propulsion with no moving mechanical parts. Until recently, limitations in the magnetic and thermal properties of conventional materials severely limited practical operating pressure gradients. However, recent advancements in the design of metal substituted magnetite enable fine control over both the magnetic and thermal properties of magnetic nanoparticles, a key element in colloidal-based magnetic fluids (ferrofluids). This paper begins with a basic description of the process and previous limitations due to material properties. This is followed by a review of existing methods of synthesizing magnetic nanoparticles as well as an introduction to a new approach based on thermophilic metal-reducing bacteria. We compare two compounds and show, experimentally, significant variation in specific magnetic and thermal properties. We develop the constitutive thermal, magnetic, and fluid dynamic equations associated with a magnetocaloric pump and validate our finite-element model with a series of experiments. Preliminary results show a good match between the model and experiment as well as approximately an order of magnitude increase in the fluid flow rate over conventional magnetite-based ferrofluids operating below 80°C. Finally, as a practical demonstration, we describe a novel application of this technology: pumping fluids at the "lab-on-a-chip" microfluidic scale.
Keywords
finite element analysis; fluid dynamics; magnetic fluids; magnetic particles; magnetorheology; microfluidics; microorganisms; micropumps; nanoparticles; colloidal-based magnetic fluids; ferrofluids; finite-element model; fluid dynamic equations; lab-on-a-chip microfluidics; magnetic nanoparticles; magnetic properties; magnetocaloric pump; microfluidic applications; thermal properties; thermophilic metal-reducing bacteria; Magnetic fields; Magnetic liquids; Magnetic materials; Magnetic properties; Magnetization; Magnetohydrodynamics; Microfluidics; Nanoparticles; Pumps; Temperature; Computer-Aided Design; Equipment Design; Equipment Failure Analysis; Heat; Magnetics; Microfluidics; Models, Theoretical;
fLanguage
English
Journal_Title
NanoBioscience, IEEE Transactions on
Publisher
ieee
ISSN
1536-1241
Type
jour
DOI
10.1109/TNB.2004.828265
Filename
1302130
Link To Document