Title :
A silicon micromachined four-pole linear phase filter
Author :
Harle, Lee ; Katehi, Linda P B
Author_Institution :
Dept. of Electr. Eng. & Comput. Sci., Univ. of Michigan, Ann Arbor, MI, USA
fDate :
6/1/2004 12:00:00 AM
Abstract :
A 27-GHz four-pole linear phase filter constructed of micromachined cavities in silicon is presented. The structure of the filter consists of four side-by-side horizontally oriented cavities, which are coupled in turn by evanescent waveguide sections with three direct-couplings and one cross-coupling between the first and fourth cavity resonators. The cavities are reduced-height waveguide resonators and are fed by microstrip lines through slot apertures. A time-domain tuning technique is employed to improve the efficiency of the design synthesis. The measured results are presented and compared to those predicted by a finite-element-method model. The simulated filter response has a bandwidth of 2.2% centered at 27.480 GHz with an insertion loss of 1.4 dB at that frequency. The measured performance indicates a 1.9% bandwidth centered at 27.604 GHz with a deembedded insertion loss of 1.6 dB at that frequency and a measured unloaded Q of 1465.
Keywords :
cavity resonator filters; elemental semiconductors; finite element analysis; linear phase filters; micromechanical resonators; microstrip lines; microwave filters; silicon; waveguide filters; 1.4 dB; 1.6 dB; 27 GHz; 27.480 GHz; 27.604 GHz; Si; bandwidth; cavity resonators; evanescent waveguide sections; finite element method model; micromachined cavities; microstrip lines; silicon micromachined four pole linear phase filter; slot apertures; time domain tuning; waveguide resonators; Bandwidth; Cavity resonators; Frequency measurement; Insertion loss; Loss measurement; Microstrip resonators; Nonlinear filters; Q measurement; Resonator filters; Silicon; Evanescent waveguide; linear phase shifter; micromachined cavity; microwave filter;
Journal_Title :
Microwave Theory and Techniques, IEEE Transactions on
DOI :
10.1109/TMTT.2004.828456