عنوان مقاله :
بررسي اثرات امواج آلتراسونيك بر خواص مورفولوژي و الكتريكي صفحات گرافني
عنوان به زبان ديگر :
Effect of ultrasonic waves on morphology and electrical treatment of graphene
پديد آورندگان :
ثابت دارياني، رضا دانشگاه الزهرا - دانشكده فيزيك - شيمي، تهران , بخشنده سراجي، راضيه دانشگاه الزهرا - دانشكده فيزيك- شيمي، تهران , حقي، حنيفه دانشگاه الزهرا - دانشكده فيزيك - شيمي، تهران
كليدواژه :
گرافن , تصوير ميكروسكوپ الكتروني روبشي , طيف FTIR , امواج آلتراسونيك , الكتروشيميايي
چكيده فارسي :
شناخت عواملي كه باعث ميشوند ويژگيهاي صفحات گرافني دستخوش تغيير شوند، بسيار مهم است. عواملي زيادي برخواص صفحات گرافني تأثير ميگذارد كه اين تأثيرات ميتوانند تحولي شگرف در كاربرد صفحات گرافني ايجاد كنند. يكي از عواملي كه توجه زيادي را به سمت خود جلب كرده است، امواج آلتراسونيك ميباشد. اين امواج اثرات قابل توجهي بر خواص الكتريكي و خواص نوري گرافن دارد. در اين كار پژوهشي تأثيرات امواج آلتراسونيك با توانهاي مختلف (35 وات، 50 وات، 360 وات و 420 وات) را بر روي چهار نمونه به مدت زمان 10 دقيقه مورد بررسي قرار دادهايم. در اين كار براي ساخت هر چهار نمونه از روش لايهبرداري الكتروشيميايي استفاده شده است. هر چهار نمونه ساخته شده از لحاظ طيف FTIR
و تصويرSEM
مورد بررسي قرار گرفته است. همچنين به منظور بررسي اثرات امواج آلتراسونيك بر خواص رسانندگي صفحات گرافني ساخته شده رفتار نمودارهاي I-V هر چهار نمونه را مورد آناليز قرار دادهايم.
چكيده لاتين :
It is important to examine the factors that determine the properties of graphene. Various factors affect the properties of graphene nanosheets that can revolutionize the use of graphene. One such factor is ultrasonic waves, which have significant effects on graphene properties. In this research, we studied the effect of ultrasonic waves with different power levels (35, 50, 360, and 420 W) on four graphene samples. in this research all the samples fabricated by electrochemical exfoliation. In this method, ammonium sulfate nonorganic salt was used for producing solution and used electrodes PT and graphite where +10 volt was applied to the electrodes Ultrasonic waves are used to homogenize the electrolyte for samples. and samples were analyzed using scanning electron microscope (SEM) imaging and Fourier transform infrared spectroscopy (FTIR) spectroscopy to determine their structure and electrical properties. The I-V curves of the samples were measured after spraying the glass substrate. Then, FTIR spectra and I-V characteristics were studied. Our results showed that with increasing ultrasonic power, FTIR spectra did not change, however conductivity of grown graphene increases
عنوان نشريه :
پژوهش فيزيك ايران
عنوان نشريه :
پژوهش فيزيك ايران