عنوان مقاله :
تأثير مقاومت بر نفوذپذيري كانال بتني مورد استفاده براي آبياري استان قزوين
عنوان به زبان ديگر :
ASSESSING THE INFLUENCE OF CONCRETE STRENGTH ON ITS PERMEABILITY OF CONCRETE CHANNEL USED FOR IRRIGATION IN QAZVIN PROVINCE
پديد آورندگان :
نادري، محمود دانشگاه بين المللي امام خميني (ره) - دانشكده ي مهندسي عمران , محمدي، فرهانه دانشگاه آزاداسلامي واحد تاكستان - دانشكده ي مهندسي عمران
كليدواژه :
كانال , آبياري , بتن , مقاومت , نفوذپذيري
چكيده فارسي :
از گذشته، كانالهاي روباز از رايجترين و بهينهترين مقاطع مورد استفاده در سيستمهاي انتقال آب به شمار ميآيند. در ميان روشهاي مختلف انتقال آب، استفاده از نيروي ثقل و به حركت در آوردن آب بهصورت جريان با سطح آزاد به همراه ايجاد كانالها و سازههاي هيدروليكي مرتبط، نظير: سرريزها، دريچهها و ... از متداولترين روشها در آبرساني و آبياري است. به همين دليل در بررسي كانالها، نوع آن، مقاومت و نفوذپذيري كانال از جمله موارد مهمي محسوب ميشوند كه براي به كارگيري كانال بايد بهآنها توجه كرد. به همين دليل، مطالعاتي براي بررسي كيفيت بتن كانال انجام و از روشهاي «پيچش» و «محفظهي استوانهيي»، براي تعيين مقاومت و نفوذپذيري كانال اصلي انتقال آب استان قزوين استفاده شد. نتايج حاصل نشان ميدهد كه بين مقاومت و نفوذپذيري بتن كانال مذكور، در مكانها و سنين مختلف ارتباط معنادار معكوسي وجود دارد.
چكيده لاتين :
The open channels, which provide the optimum sections, have been mostly used in irrigation systems in Iran, in recent years. Irrigated agriculture has been playing a vital role in the growth in crop production in IR of Iran. An open channel is a conduit in which water flows with a free surface. The free surface is subjected to atmospheric pressure .among the gravity systems used for transfer water with open surface flow and it is necessary that hydraulic structures, such as spill ways floodgate, etc., be the most popular irrigation systems for use in Iran. Therefore, in this paper, the strength and permeability of concrete lining of an ancient open channel are presented, while the strength of the concrete is determined by the ``Twis-off'' method. , The newly developed ``Silindrical Chamber'' method is used for measuring the permeability of the concrete lining. The results obtained show that a meaningful and positive correlation appears to exist between the two parameters studied. The "twist off" method is an in-situ method in which an aluminum probe sticks to the surface of the concrete under test, using epoxy adhesive; after setting and hardening of the epoxy, torquemeter is used to determine the concrete strength by measuring the maximum or failure torque. The newly developed method for permeability consists of a portable permeability measuring device that can be used under both laboratory and site conditions. In this method, an aluminum base ring sticks to the surface of concrete under test using epoxy adhesive; a cylindrical chamber is attached to the base ring after hardening the epoxy resin. The chamber is filled with water and its air bubbles are released by opening a valve designed for this purpose. The permeability of the concrete surface is measured by applying 5- bar pressure to the chamber water.
عنوان نشريه :
مهندسي عمران شريف
عنوان نشريه :
مهندسي عمران شريف