عنوان مقاله :
نوسان ساز كنترل شونده با ولتاژ از نوع پوش- پوش در فركانس 1200-1400 مگاهرتز
عنوان به زبان ديگر :
Voltage Controlled Push-Push Oscillator in the Frequency Range of 1200-1400 MHz
پديد آورندگان :
غريب، حميد دانشگاه صنعتي خواجه نصيرالدين طوسي , احمدي، آرش دانشگاه صنعتي خواجه نصيرالدين طوسي
كليدواژه :
نوسانساز پوش- پوش , نويز فاز , نوسانساز كنترلشونده با ولتاژ
چكيده فارسي :
با افزايش فركانس، ضريب كيفيت نوسان سازها كاهش پيدا كرده و بايد به دنبال روش هاي جديد براي كاهش نويز فاز نوسان سازها بود. نوسان سازهاي پوش- پوش قابليت بهبود نويز فاز را دارند. در اين مقاله يك نوسان ساز پوش- پوش كنترل شونده با ولتاژ در محدوده فركانسي MHz 1200 تا MHz 1400 به كمك نرم افزار ADS طراحي، شبيه سازي و ساخته شده است. نوسان ساز پوش-پوش از دو نوسان ساز مشابه كولپيتس كه در محدوده فركانسي MHz 600 تا MHz 700 نوسان كرده و از طريق يك مدار تزويج فاز به هم متصل هستند، تشكيل شده است. يك مدار تركيب كننده، خروجي زير نوسان سازها را با هم تركيب كرده، در نتيجه مولفه اصلي و هارمونيكهاي فرد حذف و هارمونيك دوم و ساير مولفه هاي زوج در خروجي ظاهر مي شود. كه با اين روش نويز فاز dB9 نسبت به حالتي كه زير نوسان سازها به تنهايي در محدوده MHz 1200 تا MHz 1400 نوسان كنند، بهبود مي يابد.
چكيده لاتين :
In microwave oscillators, the quality factor of the resonators decreases with an increasing
frequency. There exist some methods for compensating the losses in the resonators. The pushpush configuration is able to improve the oscillator phase noise. In this work, a push-push
voltage-controlled oscillator utilizing a parallel coupled resonator has been designed for the
frequency range of 1200-1400 MHz. The push-push oscillator consists of two similar Collpits
oscillators, which are designed for the frequency range of 600-700 MHz. These sub-oscillators
are coupled by a phase coupling network and with 180 degrees phase difference. The in-phase
combiner combines the even harmonics of each sub-oscillator and cancels the fundamental and
odd harmonics. The overall oscillation of the push-push oscillator consists of the second and
even harmonics of the sub oscillators. By this technique, the phase noise is improved 9 dB
compared to the case of the stand-alone oscillation of each sub circuit at the output frequency.