كارايي گوشه محدب در ورودي خم براي مهار امواج مورب فوق بحراني

The Efficacy of a Convex Corner at a Bend Inlet for the Control of Supercritical Oblique Waves

A novel method for the control of supercritical waves is introduced by the installation of a convex corner at a bend inlet. In this method the negative waves emitted from the convex corner are superimposed on the positive waves caused by the outer wall of the bend. Thereby, the heights of the positive waves are decreased. In the first part of the article, the existing analytical relationships for the supercritical flow in straight transitions and bends are reviewed and the interactions of waves in them are examined. Then, using the Roe-TVD finite volume method, the supercritical flow in transitions and bends is simulated numerically. The precision and accuracy of the numerical results in comparison with analytical, numerical and experimental solutions of the other researchers are satisfactory. Next, for the reduction of wave height at the outer wall of a curved channel, a small convex corner is located at the inner wall of the bend inlet. The interaction of positive and negative waves transforms the original single-hump wave at the outer wall to a smaller double-hump wave. The optimum expansion angle of the convex corner (a) is a function of the offset breadth to the bend width, d/b, radius of curvature to the bend width, rL/b, and the inlet Froude number, Fr0. The numerical studies carried out for dimensionless widths (d/b=4%, 8%, 12%), in the range of 2.5