تحليل فرايند اكستروژن پيچشي درقالب با سطح مقطع بيضوي با استفاده از روش كران بالا

An upper bound solution for analysis of twist extrusion process with elliptical die cross-section

فرايند اكستروژن پيچشي روش جديدي براي توليد فلزات آلياژهاي شديدا تغيير شكل يافته است.

Twist extrusion process is a rather new route to produce highly strained materials. In this process, severe plastic deformation is applied by large shear strains. In current article, required energy for twist extrusion by use of admissible velocity field together with the upper bound technique is predicted. The proposed model is capable of considering the effect of various parameters such as die geometry and friction conditions. In addition, the model anticipates the critical die design parameters. To verify the proposed model, the predictions were compared with the results of a finite-element analysis and reasonable consistency was observed.