بررسي عددي شروع تورق درتير كامپوزيتي يك سرگير دار با دولبه متقارن

Numerical determination of delamination onset in laminated symmetric DCB specimen

هدف اصلي اين تحقيق شروع رشد مد Iتورق دركامپوزيتهاي لايه اي چندجهتي با ترك بين دولايه صفردرجه است.

In this study, a novel numerical method is proposed for determination of mode-I interlaminar fracture toughness, G , in multi-directional (MD) double cantilever beam (DCB) specimens using fracture properties of unidirectional DCB specimens. Two factors, B and D Ic are defined to minimize the undesirable effects on strain energy release rate. B describes the difference between maximum and average of SERR along the delamination front. D c c shows the bending-bending coupling of laminated composites. B and D factors are not independent factors because both of them affect on distribution of SERR. As a result, by 3D modeling of DCB specimen in ANSYS software, limitation of B is determined so that the fracture toughness of MD DCB specimen with 0//0 interface can be predicted from toughness of unidirectional DCB specimen. Numerical results shows that fracture toughness predicted with the proposed approach is in good agreement with available experiments in the literature for B < 20%.