Title of article :
Studies on cold workability limits of pure copper using machine vision system and its finite element analysis
Author/Authors :
J. Appa Rao، نويسنده , , J. Babu Rao، نويسنده , , Syed Kamaluddin، نويسنده , , M.M.M. Sarcar، نويسنده , , N.R.M.R. Bhargava، نويسنده ,
Issue Information :
ماهنامه با شماره پیاپی سال 2009
Pages :
9
From page :
2143
To page :
2151
Abstract :
Flow behavior of pure copper was studied as a function of friction, aspect ratio and specimen geometry. Ring compression tests were conducted to determine friction factor (m) during upsetting process. Specimens were deformed in compression between two flat platens to predict the metal flow at room temperature. Machine vision system was used to analyze the deformation of 4 × 4 mm square grid marked at mid plane of the specimen. The finite element analysis results were compared with the analytical results of various stresses from the experimental measurements of axial, circumferential strains and found to be in good agreement.
Keywords :
Non-ferrous metals and alloys (A) , Forging (C)
Journal title :
Materials and Design
Serial Year :
2009
Journal title :
Materials and Design
Record number :
1068243
Link To Document :
بازگشت