Spreading of Sn-Ag solders on FeNi alloys Original Research Article

The spreading of Sn-3Ag-xBi solders on Fe-42Ni has been studied using a drop transfer setup. Initial spreading velocities as fast as ~0.5 m/s have been recorded. The results are consistent with a liquid front moving on a metastable, flat, unreacted substrate and can be described by using a modified molecular-kinetic model for which the rate controlling step is the movement of one atom from the liquid to the surface of the solid substrate. Although the phase diagram predicts the formation of two Fe-Sn intermetallics at the solder/substrate interface in samples heated at temperatures lower than 513 °C, after spreading at 250 °C only a thin FeSn2 reaction layer could be observed. Two interfacial layers (FeSn and FeSn2) were found after spreading at 450 °C.