Sodium lactate, sodium diacetate and pediocin: Effects and interactions on the thermal inactivation of Listeria monocytogenes on bologna Original Research Article

The effects and interactions of temperature (56.3–60 °C), sodium lactate (SL; 0–4.8%), sodium diacetate (SD; 0–0.25%) and pediocin (0–10,000 AU) on Listeria monocytogenes on bologna were studied and a predictive inactivation model was developed. Bologna was manufactured with different SL/SD concentrations in the formulation, dipped in pediocin solution and treated at different temperatures using combinations of parameters determined by central composite design. D-values were calculated and analyzed using second order response regression. Predicted D-values were also calculated. The observed D-values for L. monocytogenes on bologna ranged from 2.10 to 35.59 min. Temperature alone decreased predicted D-values from 99.02 min at 56.3 °C to 44.71 min at 60.0 °C. Adding SL decreased D-values (85.43–22.71 min) further; however, heat and SD combined was the most effective for reducing L. monocytogenes on bologna. An SD level of 0.25% at 58.2 °C had the overall lowest predicted D-value (15.95 min). Combination treatments increased or decreased D-values, depending on the temperature. Pediocin (2500 and 5000 AU) and heat decreased D-values, but exhibited a protective effect at higher concentrations (≥7500 AU). The results showed that interactions between additives in formulations can vary at different temperatures/concentrations, thereby affecting thermal inactivation of foodborne pathogens in meat products. Hence, food processors should modify food formulations carefully, and verify with adequate testing so that product safety is not compromised.