Effects of sewage sludge on rheological characteristics of coal–water slurry

The coal–sludge slurry (CSS) containing coal, sewage sludge and water was prepared to study the effects of sewage sludge on rheological characteristics of the CSS. The yield stress, thixotropy and rheological type of CSS were investigated and compared with those of coal–water slurry (CWS). The results showed that the yield stress of CSS appears at the shear rate range from 0.05 to 0.14 s−1. For CSS with the naphthalene sulfonate sodium formaldehyde condensate as dispersant and the sludge/coal mass ratio of 10:100, the yield stress can reach to 22.9 Pa. The thixotropy was quantitatively described by the thixotropy loop area, and sewage sludge can obviously improve the CWS thixotropy. The non-Newtonian behavior of CSS was characterized by a progressive decrease in viscosity with increasing shear rate at the shear rate range from 5 to 180 s−1. By the analysis of FTIR, SEM and optical microscope, hydrophilic functional groups and colloidal structure of sewage sludge play the key roles on the different rheological characteristics of CSS and CWS.