Effect of SHS conditions on microstructure of NiTi shape memory alloy

This work aims to optimize the parameters of the SHS process for the preparation of NiTi shape memory alloy to obtain a high-purity, low-porosity material. For this purpose, high heating rate (over 300 °C min−1), temperature of 1100 °C and process duration of 20 min were determined as the optimal parameters. To prevent nickel depletion of the product and to minimize the porosity, the use of coarse titanium particles (200–600 μm) with fresh surface can be recommended. SHS products were composed of NiTi with the admixture of Ti2Ni phase. The formation of this phase cannot be fully avoided in SHS preparation route.