Synthesis, properties of fullerene-containing polyurethane–urea and its optical limiting absorption

Based on the typical two step polyurethane–urea synthesis, self-crosslinkable polyurethane–urea compounded of poly(tetramethylene oxide), MDI (4,4′-diphenylmethane diisocyanate) and extended by AEAPS (aminoethylaminopropyltrimethoxysilane) were prepared. On the other hand, a C60-amine adducts by reacting C60 with excessive APES (aminopropyltrimethoxysilane) were synthesized and introduced into the polyurethane–urea to form the homogenous and transparent C60 containing polyurethane–urea films. FT-IR, UV, Electron Spectroscopy for Chemical Analysis, Wide-angle X-ray diffractions, dynamic mechanical thermal analysis and mechanical properties of samples were recorded. The optical limiting properties were also measured. The results show that the C60 containing polyurethane–urea is a kind of homogenous material with the ranging of C60 content. The solution state before processing makes it easy to be cast as variety configurations. With the difference in C60 content in polymers, the optical limiting properties are various and the required transmittance and transmitted energy can be altered with the C60 contents in polymers.